Frequently Asked Questions (FAQ)

How do I measure my windows ?
 

Measuring Blinds Inside Frame


WIDTH

Measure the inside width of the Window Recess. We would always recommend measuring the top, middle and bottom in case the recess is out of square and then using the narrowest Measurement.

 

DROP

Measure the inside drop of the Recess. We would always recommend measuring the far left hand side, the centre and the far right hand side and then using the shortest measurement. When Recess sizes are given Johnson Blinds will take all the nessasary adjustments to ensure you Receive a Perfect Fitting.

 

Measuring Blinds Outside Frame
WIDTH

When measuring the width decide how much you would like the blind to overlap the window recess. We would recommend a minimum of 10 cm each side although this is largely down to personal preference. Please take care to account for any obstacles that may interrupt the usage of the blind.

 

DROP

When measuring the drop decide how much you would like the blind to overlap the window recess. We would recommend a minimum of 10 cm above to allow for convenient fixing of the mounting brackets. The bottom overlap is very much personal preference.


Always first mention the width & then Drop .Preferable quote sizes in cm.

Measure for Curtain Rods

Determine Your Hardware Width Measuring for curtain rod is simple. Follows these simple steps:

1. Measure the width of the window you are going to cover.
2. Rod width does not include the width of the finials on each end. For Finials add 3 to 5 Inches width on each end, depending on the finial style.
3. Determine proper overlap. We recommend about 5 Inches per side or a total of 10 Inches.
4. Add the widths of the window, overlap and finial width as shown below to determine the overall width.

 

For example: if your window is 50” wide, you would normally order a 60” length curtain rod and the overall finished width would be 63” to 65” depending upon the finial style.

Measuring Tips:

 

  • Keep in mind when Measuring that the overall width will not interfere with any objects in the room which you are mounting the drapery hardware.

 

  • Always use a steel tape measure. All dimensions should be taken to the nearest 1/4 Inch.

 

  • Double check to make sure that you haven’t transposed width and height measurements.

 

  • Measure every window. Windows that look identical often are not.

 

  • If you have any questions, please contact Customer Service for more information.

 



How can I select deigns and fabric?

Selection is easy, You may easily check Designs and Shades from the website and we keep updating the website as and when something new arrives in our collection, still if you don’t find your required product/design/color ,you may contact us directly to re-check for the specific item you are looking for and if you want to check the live samples you may visit us or any of our dealers. And If you want to know the dealer contact details,you may also send us mail and we will provide information for the nearest dealer location.



How do I know which blind will suit my requirement?

Yes , this is very important question as to which blind will best suit your requirement. It depends upon the room location ,number of windows, size of windows ,does the room is facing sun and how much light control and privacy is required. All these questions will be properly answered, and you will be guided as to which fabric, which design and which control mechanism and most importantly the budget will best suits to the requirement. If you are at Johnson , your all queries will be resolved.



Does Johnson offer all the latest products available worldwide for window dressing?

Yes, At Johnson we are committed to provide our customers with latest products which available in any part of the world. Our sales team is always hungry to offer their clients the latest & the best products. We always believe in serving our clients with quality at most competitive prices that is a reason Johnson Blinds is most prominent brand among Interior Designers, Architects, Hoteilers and Lifestyle makers.



At what stage do I need to finalise for blinds?

Best time to finalise blinds is at the time you are decorating your walls ( Paint or Wall papers ) at that time Johnson Sales executive will assist you in selecting which Johnson Products ( Window Blinds or Curtain Rods ) best suits your requirement so that they technically serve your purpose of light controll and privacy and also match with your interiors.



How do I know about How much a blind cost?

First you have to select a design of Window Blind and then you have to take size , we will offer you a rough estimate for Product cost , Taxes and Freight.



Do I have to install myself?

No need to worry about installation. Johnson Installation Team will solve this purpose. This service is easily availble in National Capital Region and outside NCR, Johnson dealers will solve the installation issue.



Is Motorisation expensive?

Gone are the days when you have to think or plan for motorising any Window blinds, now at Johnson Blinds - motorising any blind is not at all expensive. Johnson offers the best quality motors and expert services and most competitive price for motors and remotes. Since Johnson Blinds is leading wholeseller of blinds motors,so can easily offer most cheapest price directly to consumers. Johnson offers motors from world renowned brands like Somfy, Elero and Dooya. Pre-installation services are provided to help you with electrical points and other technical details as which motors will suit your requirement.



Does Johnson products available all over India?

Yes, Johnson ( Blinds & Curtain Rods ) have a wide dealer network across India and products are availble in most parts of India.To know more about dealer in your area check for dealer Locator on Home page and send us your requirement we will revert with dealer information at earliest.



Does Johnson Blinds & Curtain Rods available outside India?

Yes, We are already selling products to many countries and can easily ship the goods to any part of the world. We have a tie-up with International Couriers and Cargos to deliver the product with safety and on time. We offer ready to install Blinds and Curtain Rods. For any information on international business you may send us e mail at  info@johnsoninteriors.com



Can I also become Johnson Dealer or Reseller?

Yes , we are always looking for energetic and enthusiastic persons who love to sell Johnson lifestyle products with passion. We always welcome you to be a part of Johnson family. Once you become the dealer you will be given all technical knowhow as to How to sell and earn from Johnson products. You may fill the dealership enquiry form ,available at home page in Enquiry.



Are Johnson products expensive?

Not at all. All Johnson products are reasonably priced. At Johnson, we are committed to offer the best quality products at most competitive prices.



Warranty :

Johnson offer 12 months warranty on entire collection.